PETKIT - Gen 2 Smart Pet Water Drinking Fountain ( White Color )

Smart Pet Water Drinking Fountain ( Gen 2 ) for your dogs and cats

👍 Gen 2 Upgrade 👍 

- Provide Safer, Fresher & Healthier Clean Water with this FILTER UPGRADE.
This is due to the 200% increase of effective filter materials found in the filtration mesh.  Please also take note that Gen 2 Petkit Pet Fountain is not compatible with Gen 1 Pet Fountain Filter Unit. 

This resolved your pet's drinking problem and studies have shown by sufficiently drinking enough fresh water, your pet can live a longer life.

Fresher, Healthier & Safer Pet Drinking Water

PETKIT pet drinking fountain's triple purifying system will effectively filter away the impurities, reduce chlorine and remove the heavy metal ions resulting in a much healthier, safer, fresher water for your pets.

Extremely Quiet & Energy Saving Pet Fountain

Equipped with a light sensor detector, pet owners can switch between Normal or Smart mode depending on your own preference. Opting for the Smart mode is highly recommended as it makes the pet fountain quieter and energy saving at the same time. During the day, the fountain will pump the water more frequently compared to at night. While Normal mode ensures the water to be always welling up to make sure the pets get access to fresh water every time.

Dynamic Water Flow

Inspired by nature, this dynamic water flow effect will greatly attract the pets to consume more water. While the transparent inner container allows pet owners to check the quality of the water with ease.

Automatic Alert Indicator

• Water Shortage Alert - A blue light will automatically light up to alert pet owners about the water shortage. Power will be turned off automatically to prevent overheating.
• Filter Change Alert - An orange light will be automatically light up to notify you when it is time to replace the filter. It is located at the bottom of the drinking fountain as shown below.
• Please be reminded that you have to change the filter after a period
• Smart Mode : Change the filter after 3 months
• Normal Mode : Change the filter after 1 month

Specification

• Gen 2 Petkit Pet Fountain 
• Water Capacity of Water Dispenser: 2L
• AC Adapter Input: AC 120V/ 60Hz
• Output: AC 12V/ 300mA
• Power Consumption: 2W
• Size: Water Fountain: 180*180*155(mm)
• Length of Power Cable: 108CM

What Is Inside The Box

• 1 Year Warranty
• 1 X Pet Drinking Fountain
• 1 X Replacement Filter
• The filter can last 3 months for Smart mode, While 1 month for the Normal mode.
• Are you looking for a standalone separate filter? Head over now pet-kit-filter
• 1 X Power Adapter

Quick Install Guide

1. Take out the device and accessories
2. Put the filter onto the pallet and soak the pet fountain filter twice for about 2 mins before use.
3. Make sure the placement of the fountain interior parts is set up correctly as shown below.
4. Fill up the container with water after washing the inner bucket twice. ( up to 2litres)

PETKIT - Filter Installation Guide

• You have to replace the Gen 2 filter every 3 months for Smart mode and 1 month for Normal mode. You can get it here > PETKIT pet fountain filter
• Before using the filter, soak the filter for about 2 mins twice by putting the filter onto the pallet.
• After replacing the filter, press and hold the reset button for 5s to make the orange light disappear.
  
  

Pet Fountain Interior Parts Placement

Washing & Cleaning Maintenance

• For better efficiency and durability of the PETKIT - Smart Pet Fountain, it is recommended to take good care of your smart pet fountain.
• Change the filter every 3 months
• Clean the motor, u-shape sponge, brush the motor and wash the container. All these takes only about 10mins.